1. Define cover shape and measure each parameters
Square/Rounded square/Round/Rectangle Octagon/Oval/Other special shape
2. Measure the radius and find where fold is.
The longer side is always cut in half by the fold.For example,side A>side B,Fold falls on side A.The fold will be designed differently,for more convenient access,if spa/hot tub was placed against wall or fence.
3. Choose the tapered thickness of foam core.
Standard thickness: 90mm to 60mm;
Optional premium thickness: 150mm to 110mm.
Upgrade options:
(1) aluminum wrapping on foam core to further prevent water absorption;
(2) Embeded stainless steel frame reinforcement,which turns cover into a WALK-ON cover.
4. Measure the length of cover skirt and the length of tie-down strap.
Pay attention to in-deck spas and partialy-in-ground spas.
Generally,the skirt had better fully cover the arylic shell edge of the spa/hot tub.
5. Logo branding on cover is available.
Customize company logo on cover top to anhace the brand image.
Factory